18mm-16mm Carbon Fiber Pro Pipe Our products are high performance carbon fiber pipe manufactured from thermoset resin by pull-wrap method with high measurement accuracy. +37/-37 and 89 degree windings were made on 0 degree carbon fiber fibers. Unlike carbon fiber eco pipes, the winding fibers it has provide strength in other directions besides longitudinal strength. 18mm/16mm carbon fiber pro pipes have the advantage of having a higher fiber ratio in the direction of 0 degrees and being more rigid than 3k carbon fiber pipes of the same diameter. The carbon fiber pro pipe we sell on this page has dimensions of outer diameter: 18mm, inner diameter: 16mm, wall thickness: 1mm in half diameter and length: 1 meter (1000mm/39”) in length. This special carbon fiber pipe is an ideal choice for small or large-scale applications where light weight and strength are important, such as special type kites, R/C models, UAVs and robotic applications. For smaller diameter products, you can check out our products at the links below.

Click here to access Carbon Fiber 3k Pipe products.
Click here to access the Carbon Fiber Pipe Eco products.

These wonderful carbon fiber pro pipes are very light, easy and quick to apply, no risk of corrosion. Grinding and polishing operations can be performed on it. In addition to being an alternative to aluminum or steel tubes, they can carry more loads with the same thicknesses as them. Or you can make a tube of the same thickness lighter and stronger with carbon fiber.

18mm-16mm Carbon Fiber Pro Pipe Fittings
Carbon fiber pro pipes are widely used in robotic applications, R/C models, drone and UAV applications, kite, motorsport, marine, etc. you can easily use it in all your applications where other lightness and strength are required.

How to Cut 18mm-16mm Carbon Fiber Pro Pipe
It can be easily cut with a fine-tipped hair saw and profile cutting tools. The edges can be leveled with wet or dry sandpaper You can make your job even easier by gluing paper tape to the part you are going to cut beforehand.

Order Note: You can choose 1 meter or 2 meter size from this product. Orders are completed with 1 meter if the neck is selected 2 meters and the order is not selected in the form of multiples of 2 meters. (you need to add 2 pieces from 1 meter to the basket to be sent at 2 meters tall.)

Outer Diameter(OD), 18mm
Inner Diameter(ID), 16mm
Wall Thickness, 1mm
Length, 1000mm or 2000mm
Weight, 85.5 g/meter
Tolerance, 0.1mm

Click here to find other Carbon Fiber Pipe Pro products.